Aegis
AEGIS · METRO BUS MAINT · BLADENSBURG GARAGE
DR
Compliance Evidence · automatic collection

Evidence

Every event, captured and hash-sealed — mapped to the rule it satisfies and ready for an assessor or auditor

9 artifacts · last 24h
7 fresh · 2 stale
Demo data · illustrative only
Evidence Items
Collected · last 24h
RuleSourceDescriptionHashCapturedState
FTA PMI · 3.1
Inspection Checklist
capture-mapper
PMI checklist completed for Metrobus 2147 front brake; all required items captured.9c2e·17bb·d048·a4f15/18/2026, 2:01:08 PMfresh
FMVSS 121 · brake wear
TRIDENT Capture
capture-mapper
Front brake pad thickness measured at 11.2 mm — above the 6 mm minimum.4a81·02fe·9b15·7d3c5/18/2026, 2:00:51 PMfresh
OEM spec · torque
Torque Wrench Log
record-archivist
Front caliper mounting bolts torqued to 290 Nm — within OEM spec.6e57·b911·3c20·f0a25/18/2026, 1:58:22 PMfresh
OEM spec · rotor runout
TRIDENT Capture
capture-mapper
Front rotor runout 0.14 mm — exceeds the OEM 0.10 mm limit; return-to-service held.9f04·c1ae·5d77·23bd5/18/2026, 1:22:09 PMstale
Tech qualification
Tech Sign-off
capture-mapper
Work performed and signed by J. Rivera — brake certification current.a722·4d0c·be39·8e515/18/2026, 12:11:18 PMfresh
FMVSS 121 · pushrod stroke
Brake Tester
record-archivist
Front-axle pushrod stroke within limit across all brake chambers.c1ae·5d77·23bd·9f045/18/2026, 11:47:31 AMfresh
FMVSS 121 · air brake
Air System Test
capture-mapper
Air system leak-down test passed; pressure drop within allowable range.b911·3c20·f0a2·6e575/18/2026, 10:32:00 AMfresh
Parts traceability
Parts Scan
signature-verifier
Replacement pads + rotor scanned; OEM part numbers matched to the work order.d048·a4f1·9c2e·17bb5/18/2026, 9:14:00 AMfresh
FTA PMI · review
Photo Capture
capture-mapper
Before/after photos captured for the brake assembly; 2 flagged for foreman review.02fe·9b15·7d3c·4a815/17/2026, 10:55:00 PMstale
Collector Agents
Status
  • capture-mapper
    Maps each repair → the rule it satisfies
    ok
  • record-archivist
    Hashes + seals every record into the ledger
    ok
  • signature-verifier
    Verifies the seal on every sealed record
    ok
  • inspection-verifier
    Re-checks PMI completeness on a schedule
    ok
Retention window
3 years
tamper-evident retention
Every record is hashed into the seal ledger and signed by the customer's own signing key. An assessor can replay the chain offline to confirm nothing was altered.